Fusion Pro Laser Series

This high-quality air compressor blows a constant stream of air across the cutting area, which removes heat and combustible gases from the work area and provides the best cutting results available. The rubber vibration-dampening feet reduce the noise level of the compressor, and connection is a breeze with our quick-connect inlet and outlet ports on the compressor and the laser system.

With the 3-Jaw Chuck rotary, objects are clamped into the device’s 3-jaw chuck, allowing you to rotate cylindrical or oddly-shaped items in applications that demand more precise alignment.

The Rim-Style rotary attachment adds the ability to engrave bottles, glasses, flashlights, or any other cylindrical item. The rotary attachment is as easy to set up as placing your product on the rotary, raising or lowering the scissor lift to level the engraving area, and printing to the laser.

The optional Task Plate for the Fusion Pro 24 and 36 offers you the flattest option for engraving pieces that require the most consistent engraving across a large area. These single panel tables are easily inserted and removed from the machine, and are ideal for engraving materials that are very sensitive to focus variation.

Note: The Task Plate is included with the Fusion Pro 48.

Designed for larger pieces of material, the optional slat-style vector table greatly reduces the points of contact between the material you are cutting and the work table, significantly reducing backside burning and providing optimal airflow for the removal of dust and debris.

Optional on the Pro 24/36 (Dual source) and Pro 48 models, the Grid Cutting Table is ideal for most cutting applications. The grid table limits how much of the surface area of your piece contacts the work table, reducing backside burning and providing greater air circulation while still accommodating smaller material stock. The Grid Table is included with the Fusion Pro 24/36 CO2 models.

Although the standard 2.0-inch lens provides amazing detail, our 1.5-inch optional lens assembly is designed for the highest-resolution engraving and etching of extremely small fonts.

Note: For Fusion Pro 24 and 36 only

The 4″ optional lens produces a focused beam over a longer vertical distance, which makes it ideal for cutting through very thick materials.

Note: For Fusion Pro 24 and 36 only

*Cannot be used in conjunction with IRIS™ Camera System

The 4″ optional lens produces a focused beam over a longer vertical distance, which makes it ideal for cutting through very thick materials.

Note: For Fusion Pro 48 only

*Cannot be used in conjunction with IRIS™ Camera System

PhotoLaser Plus takes photo engraving with your Epilog laser to the next level by easily processing photos for engraving on all types of materials. Epilog Laser has partnered with CADLink to bring you the industry’s best photo processing software: PhotoLaser Plus. The easy-to-use software interface and powerful photo processing tools allow you to create the highest-quality photo engravings in the industry.