Legend Series
Legend Series
Series: 6000-7000
Technical specifications of our Legend Series. The 36EXT, 32EX, 24EX, 24TT, 32, and 24 are legacy systems of Epilog Laser. See specifications on these units below.
Technical Specifications
|
Laser Machine:
|
Legend 36EXT |
Legend 32EX |
Legend 24EX |
Legend 24TT |
Legend 32 |
Legend 24 |
|
Work Area:
|
36″ x 24″ (914 x 610 mm) |
32″ x 20″ (812 x 508 mm) |
24″ x 20″ (609 x 508 mm) |
24″ x 12″ (609 x 305 mm) |
32″ x 20″ (609 x 508 mm) |
24″ x 12″ (609 x 305 mm) |
|
Material Thickness:
|
12″ (305 mm) | 9″ (228 mm) | 9″ (228 mm) | 6″ (152 mm) | 9″ (228 mm) | 9″ (228 mm) |
|
Max material thickness with table removed:
|
14″ (355 mm) | |||||
|
Table Size:
|
37″ x 21″ (940 x 533 mm) | 33″ x 21″ (838 x 533 mm) | 27.25″ x 13.25″ (692 x 335 mm) | |||
|
Laser Tube Wattages:
|
30, 40, 50, 60, 75 or 120 watts | |||||
|
Laser Source:
|
State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable. | State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable. | State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable. | State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable. | State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable. | State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable. |
|
Intelligent Memory Buffer:
|
Store unlimited files up to 64MB. Rolling buffer allows files of any size to be engraved. | Store unlimited files up to 32 MB. Rolling buffer allows files of any size (32 MB and larger) to be engraved. | Store unlimited files up to 32 MB. Rolling buffer allows files of any size (32 MB and larger) to be engraved. | Store unlimited files up to 32 MB. Rolling buffer allows files of any size (32 MB and larger) to be engraved. | Store unlimited files up to 32 MB. Rolling buffer allows files of any size (32 MB and larger) to be engraved. | Store unlimited files up to 32 MB. Rolling buffer allows files of any size (32 MB and larger) to be engraved. |
|
Air Assist:
|
Attach an air compressor to our included Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface. | Standard Features – Air Assist (pump optional), Auto Focus, Red Dot Pointer, 2″ focus lens, relocatable home, flash upgrade electronics. |
Air Assist (pump optional), Auto Focus, Red Dot Pointer, 2″ focus lens, relocatable home, flash upgrade electronics. | Air Assist (pump optional), Auto Focus, Red Dot Pointer, 2″ focus lens, relocatable home, flash upgrade electronics. | Air Assist (pump optional), Auto Focus, Red Dot Pointer, 2″ focus lens, relocatable home, flash upgrade electronics. | Air Assist (pump optional), Auto Focus, Red Dot Pointer, 2″ focus lens, relocatable home, flash upgrade electronics. |
|
Laser Dashboard:
|
The Laser Dashboard controls your Epilog Laser’s settings from a wide range of software packages – from design programs to spreadsheet applications to CAD drawing packages. | Laser Control Display Panel: 4″ x 3″ LCD displays job graphic, stored file names, speed, power, run time, and more. Drop-down menus provide user control of all laser settings, calibration, and special features. | Laser Control Display Panel: 4″ x 3″ LCD displays job graphic, stored file names, speed, power, run time, and more. Drop-down menus provide user control of all laser settings, calibration, and special features. | Laser Control Display Panel: 4″ x 3″ LCD displays job graphic, stored file names, speed, power, run time, and more. Drop-down menus provide user control of all laser settings, calibration, and special features. | Laser Control Display Panel: 4″ x 3″ LCD displays job graphic, stored file names, speed, power, run time, and more. Drop-down menus provide user control of all laser settings, calibration, and special features. | Laser Control Display Panel: 4″ x 3″ LCD displays job graphic, stored file names, speed, power, run time, and more. Drop-down menus provide user control of all laser settings, calibration, and special features. |
|
Red Dot Pointer:
|
Since the laser beam is invisible, the Red Dot Pointer on Epilog’s Laser Systems allow you to have a visual reference for locating where the laser will fire. | |||||
|
Relocatable Home:
|
When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Moveable Home Position feature on the Legend Series. | |||||
|
Operating Modes:
|
Optimized raster, vector or combined modes with engraving and cutting in one job. | Optimized raster engraving, vector cutting or combined raster/vector mode. | Optimized raster engraving, vector cutting or combined raster/vector mode. | Optimized raster engraving, vector cutting or combined raster/vector mode. | Optimized raster engraving, vector cutting or combined raster/vector mode. | Optimized raster engraving, vector cutting or combined raster/vector mode. |
|
Motion Control System:
|
High-speed, continuous-loop, DC brushless servomotors using linear and rotary encoder technology for precise positioning. | High-speed, continuous-loop, DC servo motors using linear encoder technology for precise positioning. | High-speed, continuous-loop, DC servo motors using linear encoder technology for precise positioning. | High-speed, continuous-loop, DC servo motors using linear encoder technology for precise positioning. | High-speed, continuous-loop, DC servo motors using linear encoder technology for precise positioning. | High-speed, continuous-loop, DC servo motors using linear encoder technology for precise positioning. |
|
X-Axis Bearings:
|
Ground and polished stainless steel long-lasting bearings. | Ground and polished stainless steel long-life bearing system. | Ground and polished stainless steel long-life bearing system. | Ground and polished stainless steel long-life bearing system. | Ground and polished stainless steel long-life bearing system. | Ground and polished stainless steel long-life bearing system. |
|
Belts:
|
Advanced B-Style doublewide Kevlar precision drive belts. | Advanced B-Style doublewide Kevlar precision drive belts. | Advanced B-Style doublewide Kevlar precision drive belts. | Advanced B-Style doublewide Kevlar precision drive belts. | Advanced B-Style doublewide Kevlar precision drive belts. | |
|
Resolution:
|
User controlled from 150 to 1200 dpi. | User controlled from 150 to 1200 dpi. | User controlled from 150 to 1200 dpi. | User controlled from 150 to 1200 dpi. | User controlled from 150 to 1200 dpi. | |
|
Speed and Power Control:
|
Computer or manually controlled speed and power in 1% increments to 100%. Vector color mapping links speed and power settings to any RGB settings. | Computer or manually controlled speed and power in 1% increments to 100%. Vector color mapping links speed and power settings to any RGB settings. | Computer or manually controlled speed and power in 1% increments to 100%. Vector color mapping links speed and power settings to any RGB settings. | Computer or manually controlled speed and power in 1% increments to 100%. Vector color mapping links speed and power settings to any RGB settings. | Computer or manually controlled speed and power in 1% increments to 100%. Vector color mapping links speed and power settings to any RGB settings. | |
|
Print Interface:
|
10 Base-T Ethernet or USB connection. Compatible with Windows XP/Vista/7. | 10 Base T Ethernet or Parallel connection. Compatible with Windows XP/2000. | 10 Base T Ethernet or Parallel connection. Compatible with Windows XP/2000. | 10 Base T Ethernet or Parallel connection. Compatible with Windows XP/2000. | 10 Base T Ethernet or Parallel connection. Compatible with Windows XP/2000. | 10 Base T Ethernet or Parallel connection. Compatible with Windows XP/2000. |
|
Size (W x D x H):
|
50.5″ x 33″ x 42″ (1283 x 838 x 1067 mm) – (120 watt: 36″/914 mm deep). | 42″ wide x 32.5″ deep x 42″ high (1067 x 826 x 1067 mm) – 120 watt cabinet is 34.5″ deep (876 mm). | 38″ wide x 32.5″ deep x 40″ high (965 x 826 x 1016 mm). | 32″ wide x 24.5″ deep x 15.75″ high (813 x 622 x 400 mm). | 38″ wide x 32.5″ deep x 40″ high (965 x 826 x 1016 mm). | 38″ wide x 27″ deep x 41″ high (965 x 685 x 1041 mm). |
|
Weight:
|
440 lbs (199 kg) | 375 lbs (172 kg) | 350 lbs (160 kg) | 100 lbs (45.5 kg) | 350 lbs (160 kg) | 325 lbs (147 kg) |
|
Electrical Requirements:
|
Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase. | Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase. | Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase. | Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase. | Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase. | Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase. |
|
Super-Silent Cooling Fans:
|
64 db (not available on the 120 watt). | |||||
|
Ventilation:
|
External exhaust to the outside or internal filtration system required. There are two output ports, each 6″ in diamter. | External exhaust to the outside required. Output diameter at machine is 6″. | External exhaust to the outside required. Output diameter at machine is 4″. | External exhaust to the outside required. Output diameter at machine is 4″. | External exhaust to the outside required. Output diameter at machine is 4″. | |
|
Laser System Classification:
|
Class 2 Laser Product – 1 mW CW Maximum 600-700 nm. | |||||
|
Safety:
|
CDRH Class IIIa | CDRH Class IIIa | CDRH Class IIIa | CDRH Class IIIa |