|
Laser Machine:
|
|
|
|
Work Area:
|
32″ x 20″
(812 x 508 mm) |
40″ x 28″
(1016 x 711 mm) |
|
Material Thickness:
|
14″ (101.5 mm) |
13.25″ (336 mm) |
|
Laser Tube Wattages:
|
30, 40, 50, 60, 75 or 120 watts |
|
Laser Source:
|
CO2, air-cooled, all-metal Waveguide laser tube, 10.6 micrometers. |
|
Intelligent Memory Buffer:
|
Store unlimited files up to 128MB. Rolling buffer allows files of any size to be engraved. |
|
Print Driver and Software:
|
Laser Dashboard, Epilog Control Center, and Epilog Job Manager. |
|
Air Assist:
|
Attach an air compressor to our included Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface. |
|
Red Dot Pointer:
|
Since the laser beam is invisible, the Red Dot Pointer on Epilog’s Laser Systems allow you to have a visual reference for locating where the laser will fire. |
|
Operating Modes:
|
Optimized raster, vector or combined modes with engraving and cutting in one job. |
|
Motion Control System:
|
High-speed, continuous-loop, DC brushless servomotors using linear and rotary encoding technology for precise positioning. |
|
X-Axis Bearings:
|
Ground and polished stainless steel, teflon coated, self-lubricating bearings. |
|
Print Interface:
|
10 Base-T Ethernet or USB connection. Compatible with Windows XP/Vista/7/8/10. |
|
Size (W x D x H):
|
52.5″ x 35.5″ x 40.75″ (1334 x 851 x 1035 mm) |
60.5″ x 41.25″ x 42.25″ (1537 x 1048 x 1073 mm) |
|
Weight:
|
500 lbs (227 kg)
Dual Source: 536 lbs (243 kg) |
643 lbs (292 kg)
Dual Source: 679 lbs (308 kg) |
|
Electrical Requirements:
|
Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase. |
|
Ventilation:
|
650 CFM (1104 m3/hr)external exhaust to the outside or internal filtration system required. There are two output ports, each 4″ in diamter. |
|
Laser System Classification:
|
Class 2 Laser Product – 1 mW CW Maximum 600-700 nm. |
