Epilog Mini and Helix Firmware and Driver Downloads

Firmware Download

Last Update: 1/4/08

Version: 1.0.2.4 (replaces 1.0.2.3)

Changes:

Changes were made to resolve vector cutting issues found on a small number of machines shipped in December 2007. All other machines will not be affected by this update.

File Download: Click here to download firmware version 1.0.2.4.

Instructions: Click on the firmware download above and save the file. Normally, the default Save location is onto your Desktop folder.

Once you have the file downloaded, simply double click the file to extract it. You will be asked to save the extracted file to a new location. Select the location you want to save this file to and proceed. Extracting the file changes it from an .exe format to a .hex format. It is the .hex format file that you will use to upgrade.

Print the full instruction files for step by step directions on upgrading your system, or read Section 17 in your manual.

Backup: Looking for an older version of our firmware? Click here to find recent updates.

Driver Download

Last Update: 6/19/08

Version: 8.01 (replaces 7.08)

Changes:

New Laser Dashboard layout
Adds a configuration area to the Advanced tab

File Download: Click here to download driver version 8.01

Configurations Downloads: Click on the corresponding wattage below to automatically load the suggested driver settings in your configuration menu.

25 watt	30 watt	35 watt	40 watt
45 watt	60 watt	75 watt	120 watt

Dat File Conversion: If you have any saved configuration settings in the driver (.dat files), click here to download a program to update each file so it will work with the newest version of the driver. Instructions for how this program works can be downloaded by clicking here.
Install Instructions: Click here to download the full instructions for upgrading your drivers, or read section 5 in your manual.
Center-to-Center Engraving Instructions: Download the instructions for using Center-Center Engraving.

Backup: Looking for an older version of our drivers? Click here to find recent updates.

New! 64 Bit Operating System Driver (Beta Version)

For customers working with a 64 bit operating system, we have developed a beta version of our driver. Click here to install the 64_801.exe driver file.

Why is it a beta version? We are still testing the driver with 64 bit operating systems, and would like any comments that you have. If you test out the system and have any problems or comments on the driver, please send them to sales@epiloglaser.com.

How do I know if I have a 64 bit operating system? If you have one, you probably know it! The 64 bit operating system is still very rare and is not supported by most peripheral devices. Information on the 64 bit operating system is available here.

Vector Only CAD Driver Download

There are a number of different versions of AutoCAD and all of the newer versions (2001 forward) have unique printing problems when in vector cutting mode. Epilog supplies a CAD driver that was specifically designed to eliminate the known printing problems found in each of these different versions.

This driver is designed as a vector cutting only driver and does not have raster engraving capabilities. This vector only driver can be used with Legend, Legend EX, TT, Mini, Helix and Legend EXT machines and is Windows XP/2000 compatible.

Last Update: 5/17/05

Version: 7.00

Changes: This is the first version of the Vector Only CAD driver.

File Download: Click here to download driver version 7.00